skyworks solutions, inc. ? phone [781] 376 - 3000 fax [781] 376 - 3100 sales@skyworksinc.com ? www.skyworksinc.com 204000a ? skyworks proprietary information ? products and product informatio n are subject to change without notice ? april 25, 2016 1 product summary sky 77759 - 51 multi mode multi band power amplifier module for p e nt a - band ( i, ii, iv, v, viii ) wcdma / hsdpa / hsupa / hspa+ / lte bands 1, 2, 4, 5, 8, 26, 27, 34, 39 applications ? multiband 3g handsets ? wcdma/ hsdpa/ hsupa / lte - modulated handsets for bands i, ii, iv, v, viii features ? 50 ohm input and output impedances, integrated dc blocking on all ports ? cmos - c ompatible , two - wire mipi ? logic inputs (sclk, sdata) ? vcc stages can attach to battery or buck dc/dc ? small, low profile package: 5.3 mm x 4.3 mm x 0. 75 mm (max.) 32- pad configuration 3g features: wcdma mode supports output power, bandwidth for b ands i, ii, iv , v, viii (and sub - bands ix, x, xviii, ixx, xxvi) through an integrated band - select switch digital bias optimization through r ffe interface for best efficiency / linearity tradeoff 4g features: optimized for average power tracking system lte supports output power bandwidth bands 1, 2, 4, 5, 8, 26, 27, 34, 39 (and sub - bands 9, 10, 18, 19, 26) description the sky 77759- 51, a multimode multiband (mmmb) power amplifier module (pam) , supports 3g /4g handsets and operates efficiently in wcdma and lte modes. the pam includes separate wcdma blocks operating in low and high bands, a logic control block for multiple power control lev els, and band enable functions in both cellular and umts. rf i/o ports are internally matched to 50 to minimize external components. extremely low leakage current maximizes handset standby time. the ingap/gaas die and passive components are mounted on a multi - layer laminate substrate and the assembly encapsulated in plastic overmold. wcdma : the sky 77759- 51 enhanced architecture support s wcdma, high - speed downlink packet access (hsdpa), high - speed uplink packet access (hsupa) and lte modulations ; it cover s multiple bands for 3gpp including bands i, ii, iv, v, viii, and operate s at different power modes. the module is fully controllable via mipi interface. lte: the sky 77759- 51 meets spectral linearity requirements of lte modulation with qpsk/16qam up to 20 mhz bandwidth, including various resource block allocations, with good power - added efficiency.
ordering information product name order number evaluation board part number sky 777 59 - 51 multi mo d e multi ban d power amplifier module sky 777 59 - 51 en40 - d875 - 001 copyright ? 2016 , skyworks solutions inc. all rights reserved. information in this document is provided in connection with skyworks solutions inc. (skyworks) products or services. these materials including the information contained herein are provided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no r esponsibility for errors or omiss ions in these materials or the information contained herein. skyworks may change its documentation products services specifications or product descriptions at any time with out notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts incompatibilities or other difficulties arising from any future changes . no license whether express implied by estoppel or otherwise is granted to any intellectual property rights by this document. sky works assumes no liability for any materials products or information provided hereunder including the sale distribution reproduction or use of skyworks products information or materials except a s may be provided in skyworks terms and conditions of sale. th e materials products and information are provided as is with out warranty of any kind whether express implied statutory or otherwise including fitness for a particular purpose or use merchantability performance quality or non C infringement of any intellect ual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the a cc uracy or completeness of the information text graphics or other items contained within these materials. skyworks shall not be liable for any damages i ncluding but not limited to any special indirect incidental statutory or consequential damages including with out limitation lost revenues or lost profits that may result from the use of the materials or information whether or not the recipient of ma terials has been advised of the possibility of such damage. skyworks products are not intended for use in medical lifesaving or life - sustaining applications or other equipment in which the failure of the skyworks products could lead to personal injury death physi cal or environmental damage. skyworks customers using or selling skyworks products for use in such applications do so at thei r own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsibl e for their products and applications using skyworks products which may deviate from published specifications as a result of design defects errors or operation of products out side of published parameters or design specifications. customers should include d esign and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance customer product design or damage to any equipment resulting from the use of skyworks products out side of stated published specifica tions or parameters. skyworks and the skyworks symbo l are trademarks or registered trademarks of skyworks solutions inc. in the united states and other countries. third - party brands and names are for identification purposes only and are the property of their respective owners. additional information including relevant terms and conditions posted at www.skyworksinc.com are inc orporated by reference.
|
